Skip to content

Tradepit scanner. Conditions, feed and Telegram notifications

The Tradepit scanner watches pairs on Binance, Bybit, OKX, Bitget, and KuCoin based on your conditions. How to set them, open a find in a trading window and get it in Telegram.

Updated

What the scanner does

The Tradepit scanner looks for pairs based on your conditions on Binance and Bybit, as well as on OKX, Bitget and KuCoin, and sends its finds to a feed beside the chart.

In Tradepit you can trade from the order book and directly on the chart. In a Tradepit trading window the scanner feed appears beside the chart. The button on a find’s row opens its pair on this chart. You place the order yourself, the scanner opens no trades.

Each scanner watches one exchange and one market, Futures or Spot. An account can have up to 10 scanners.

The scanner keeps looking when the Tradepit tab is closed. It needs no exchange key, a key is needed to trade.

How to start, step by step

  1. Create an account and confirm your email. Without a confirmed email a scanner cannot be created or saved, and without signing in you can only look at the form.
  2. Open the Scanner section and press “+ New scanner”. Give the scanner a name, it is not saved without one.
  3. In the “Exchange and market” row pick the exchange and the Futures or Spot market.
  4. In the “Conditions” block tick the conditions and set “from” or “to”. The “Turnover over a period” filter over 24 hours from $5,000,000 is already on. It only sifts out illiquid pairs, so at least one more condition or a pattern from the “Patterns” block is needed.
  5. Choose the “Signal on a match”. A new scanner has LONG. LONG and SHORT need “Price change” turned on, and with “ANY” you choose the direction of the price yourself.
  6. Press “Save scanner”. The scanner works only with the saved settings.
  7. Open a Futures or Spot trading window, press the window’s ⚙ and under “Workspace” choose “Chart + scanner”. The “Scanner” feed takes the place of the order book beside the chart.
  8. For the scanner to write to you in Telegram, connect the bot through Account → Telegram notifications → Connect Telegram and turn on “Scanner” under “What to send”.

The “Getting started” guide explains how to create an account and confirm your email.

Conditions and settings

The scanner has four conditions. They are “Turnover over a period”, “Price change”, “Volume spike” and “Volatility”. The checkbox turns a condition on, and all the ticked conditions must hold together. The window of a condition is from 1 second to 24 hours. An empty “from” means 0, an empty “to” means no upper limit.

“Turnover over a period” counts the pair’s turnover over the window in dollars or in “% avg.”, the percent of its average turnover. With a window of exactly 24 hours and the unit “$” it is a liquidity filter. It sifts out small pairs and gives no finds on its own.

“Price change” shows how much the price changed over the window, in percent. The direction is “rise”, “fall” or “either”. The “from” threshold is required and above 0, so “from 1.5” means a move of 1.5% or more.

“Volume spike” shows how many times the volume over the window exceeds the average over 1, 4 or 24 hours. The window must be shorter than this base. The threshold “from × 3” means three times the average.

“Volatility” is the average candle range. NATR gives it in percent of the price, ATR in units of the pair’s price. The period is 7, 14 or 21 candles of 1, 5 or 15 minutes or of 1 hour, no more than 24 hours in total.

“Signal on a match” labels a find LONG, SHORT or “ANY”. LONG counts only a rise of the price, SHORT only a fall. The scanner does not open a trade.

“Schedule” sets when the scanner looks. It is “Round the clock”, “By time” from one hour to another in UTC, or by the hours of Asia, London and New York. The time is always UTC. Outside the schedule the scanner finds nothing.

“Pairs” takes “All pairs”, “Only chosen”, or all but the chosen ones with “Exclude pairs”. Up to 300 pairs can be chosen. “Listing” picks pairs by their age on the exchange in days. “Exclude new” removes pairs younger than the set number of days, “New only” keeps only them.

Your candlestick patterns go into the “Patterns” block, up to 100 per scanner. When all candles of a pattern except the last one have formed, the row says “Near”, and when the last one closes, “Confirmed”. The guide “Build your own candlestick pattern without code” explains how to build a pattern.

The “Find” block sets when a find is confirmed and when it leaves. “Hold”, from 0.5 s to 1 hour, waits for the conditions to come back. “Repeat”, from 0 to 600 seconds, is the pause before the pair can be found again. “Minimum duration”, up to 4 hours, is how long the conditions must last before “Confirmed”.

A new scanner has a hold of 2 s, a repeat of 60 s, a minimum duration of 0, “Near” shown and the sound on. The “Scalp” preset sets the hold to 1 s and the repeat to 30 s, turns “Near” off and the sound on.

The feed and the way to trading

The “Scanner” feed shows the finds of enabled, saved scanners whose conditions are currently met. It is not a history. When a find ends, its row leaves. The feed holds up to 60 rows, newest on top.

The feed has the columns “Age”, “Pair”, “Side”, “Status”, “Value”, “Trade” and “Open”. “Value” shows the condition closest to its threshold and the threshold itself. ▲ means the signal LONG, ▼ means SHORT, and this is a scanner setting, not a forecast. A click on a row expands each condition against its threshold.

“Near” means the pair has come near the threshold. “Holding” means the conditions are met but have not yet lasted the “Minimum duration”. “Confirmed” means the conditions are met and have lasted the required time. “Weakening” means the conditions are no longer met and the scanner waits out the “Hold”. If they do not come back, the find ends.

“Trade” puts the find’s pair into this trading window, and the chart and the feed stay. “↗” opens the pair in a new trading window with the same feed, and with Shift in a separate browser tab. No order is sent. “Trade” is unavailable for a find of the other market and for “Weakening”.

The filter in the feed header shows the finds of all scanners or of one, and the choice is remembered for this trading window.

The bell in the Tradepit top bar counts the confirmed finds of your scanners on any screen. The “Confirmed finds” list holds up to the last 50, and a click on a find opens its pair in a trading window.

The sound of a find plays only when a new find is confirmed. The browser lets a page play sound only after the first click or key press on it. If several tabs are open, the sound plays in one of them.

Telegram notifications

Scanner, Radar and Patterns tell you in Telegram when they fire. Scanner writes when one of your scanners fires.

  1. Open Account → Telegram notifications and press “Connect Telegram”.
  2. The bot opens in Telegram. Press Start in it.
  3. Once Telegram is connected, turn on “Scanner” under “What to send”. Nothing is sent until you turn the tools on. The setting is saved immediately.
  4. “Test connection” sends a test message.

The bot writes about a find no more than once, when it becomes “Confirmed”. It does not write about “Near”, “Holding” or “Weakening”. The messages come even when the Tradepit tab is closed.

A message has the scanner’s name, the pair, the exchange and the market, the side if one is set, and the values of the conditions. Under the message is the button “Open Tradepit”.

A find by a pattern from the “Patterns” block is sent when “Patterns” is on under “What to send”. Notifications come to a private chat with the bot only. The “Density radar” guide explains how Radar writes in Telegram.

Limits

The scanner has no conditions on open interest, liquidations or funding. It checks only turnover, price change, volume spike and volatility.

The scanner has no alert for the price reaching a set level. “Price change” counts a move in percent over a window.

The scanner does not trade. It opens no trades and places no orders, you place the order yourself in a trading window.

The feed, the bell and the sound work while the Tradepit tab is open. The bell’s list is not kept after the tab is closed or you sign out. The scanner keeps looking meanwhile, and the Telegram messages come.

The “Open Tradepit” button in Telegram opens the Tradepit trading windows, not the pair of the find. Open the pair from the feed or the bell.

With no connection, or if an exchange is silent for more than 3 seconds, the feed has no rows of that exchange. Finds of a scanner whose rule was changed after the find are hidden.

A scanner that is off finds nothing. Edits of the form take effect only after “Save scanner”.

An account can have up to 10 scanners. A name is up to 200 characters, a scanner takes up to 300 pairs and 100 patterns.

The scanner is a tool, not advice. Every decision is yours.