Density radar. A density screener for large limit orders across the order books of different pairs
What order book walls are, how Tradepit's density radar finds them across pairs on Binance, Bybit, OKX, Bitget, and KuCoin, and how to tell if a wall was eaten or pulled.
Updated
What the density radar is
The density radar in Tradepit shows the large limit orders in the order books of the pairs on Binance, Bybit, OKX, Bitget, and KuCoin, futures and spot, and refreshes them every 2 seconds.
Supported exchanges are Binance, Bybit, OKX, Bitget, and KuCoin.
An order book wall is a price level with a large volume of limit orders. Radar identifies a price level as a wall when its limit order volume is several times the median volume per level near the current price. On the screen these levels are listed in the Walls table.
Radar does not need your exchange keys.
Tools like the density radar are also called density screeners. In Tradepit it is the Radar section. The Screener section is a different tool, a table of pairs with the parameters you choose.
How to start, step by step
- Sign in and confirm your email. Radar opens only after the email is confirmed, and a guest sees an invitation to sign in.
- Open the Radar section. In the header of the screen click Exchanges, leave on the exchanges and markets you need and click Apply. At least one market stays on.
- Click the Coins field and in the Coins and pairs window choose which pairs Radar watches. All pairs, only the top by market cap, everything but the top, or your own lists of pairs. Then click Apply.
- Set Size from, Above the usual level, To price, Standing at least, the side and Signal closer than. The table shows the walls that pass the filter.
- Click a row of the table, an approach lane or a journal entry to see the walls of the pair and open it for trading.
- For Radar to write to you in Telegram, connect the bot through Account → Telegram notifications → Connect Telegram, then turn on Radar under What to send. Nothing is sent until you turn the tools on. Radar writes only while Signal closer than is above 0.
What you can set
Densities are picked by size, by how many times they are larger than the usual level of the book, by distance to the price and by how long they have stood.
Size from sets the smallest sum on the level, in dollars. Above the usual level sets how many times at least the order is larger than the usual level of this coin's book near the price. To price sets how far from the current price to look for orders. Standing at least sets how many minutes at least the order has already stood.
Side keeps all orders, only Bid or only Ask. Bid is buy orders below the price, Ask is sell orders above it.
In the Coins and pairs window the top by market cap is 10, 20, 50, 100 or 200 coins. My pairs holds up to 8 lists, with up to 200 pairs in a list. Exclusions work in every mode and outweigh your lists, and a coin can be excluded on every exchange at once.
Signal closer than sets a distance to the price in percent. When the price comes this close to a wall, its row lights up and the journal says so. 0 turns the signal off.
By default the filter takes orders from $100,000, 3 times above the usual level, within 3% of the price and with no age threshold, with the signal at 0.3%. Reset brings back these values, the side, the coin mode and the top 50, while the exchanges, lists and exclusions stay.
The filter is kept as a setting of the account, so another browser of the same account opens Radar with the same filter.
What you see on the screen and in Telegram
The Walls table has the columns Pair, Side, Price, Size, × med., To price, Approach, Standing, Eaten and Pulled. Click a column header to sort by it, which works for every column but Side and Price. Click a row to see the pair.
The bar in the Size column is the share of its peak still standing. × med. is how many times larger than the median level of the book near the price. Approach is when the price reaches the wall if it keeps the pace of the last minute. Eaten is the share of the peak that trades took, and Pulled the share taken away without trades.
Approach lanes show up to eight walls. The price is in the middle, bids left, asks right, each wall as far from it as it is. The modes Nearer, Sooner and Larger show the nearest walls, the ones the price would reach first at the pace of the last minute, or the largest.
The pair card shows the walls of the chosen pair that pass the filter, around its price. Open in trading opens the pair in a trading window of its exchange and market, Open in terminal opens its order book in the Terminal section. To my pairs adds the pair to your list, Exclude takes it out of the filter.
When the price comes close to a wall, its row lights up, and the journal shows which walls were eaten or pulled. Approach in the journal means the price came closer than your signal distance. What Eaten, Partly and Pulled mean is in the section “How to tell whether a wall was eaten or pulled”.
Scanner, Radar and Patterns tell you in Telegram when they fire. Radar writes when the price comes close to a wall that passes your Radar filter. The distance is the Signal closer than field of the same filter.
How to tell whether a wall was eaten or pulled
While a wall stands, there is no outcome yet, so watch its row in the Walls table. When the bar in the Size column gets shorter, part of the peak has gone from the wall. The Eaten and Pulled columns show how much of it trades took and how much was taken away without them.
Radar checks every decrease in a wall's volume against the trades of the pair at the price of the wall. What trades took goes to Eaten, the rest to Pulled.
When a wall is gone, the journal writes its outcome in one entry. The entry shows the price of the wall, its peak and how long it stood.
The outcome is one of three.
| Outcome | What it means |
|---|---|
| Eaten | The price went through the level of the wall. |
| Partly | The price did not go through the level, and trades took at least 30% of the peak. |
| Pulled | The price did not go through the level, and trades took less than 30% of the peak. |
In the Eaten column it is a share, in the journal it is an outcome, and the outcome is determined primarily by whether the price crossed the wall's level. When the price went through the level of the wall, the journal writes Eaten even if trades took a smaller part of the peak.
Not every wall that disappears gets a journal entry.
- A wall that stood less than 10 seconds gets no outcome.
- When an order is taken away and put back on the same level less than 3 seconds later, it is the same wall, and there is no entry.
- When Radar no longer counts a level as a wall while at least half of its peak still stands there, there is no outcome. This happens when the price moves more than 10% away from the wall or the usual level of the book grows.
- While the book of a pair is out of sync with the exchange, its walls get no outcomes. After a minute out of sync, Radar forgets these walls without an entry.
- Outcomes come only for walls on the selected side and among your selected pairs, whose peak size meets Size from and whose age meets Standing at least.
The journal shows what happened to a wall, not what will happen to the price. Radar does not know why an order was placed or why it was taken away, and cannot tell a real wall from one placed for show.
Limits
An exchange gives the book of a pair only to some distance from the price, and the pair card says how far. Further out Radar sees only the walls that changed while it watched.
The age in the Standing column counts from when Radar first saw the wall.
The table shows at most 400 walls. When more pass the filter, narrow it to see the rest.
To price takes from 0.05% to 10%, Signal closer than up to 5%, Standing at least up to 1440 minutes.
While the books are still syncing with the exchanges, walls appear as each book matches. When a market is silent for more than 5 seconds, its last frame is shown.
The journal keeps up to 300 entries and starts over when the exchanges, the coins, the side or the thresholds of the filter change. An approach to the same wall goes into it again only after 5 minutes.
Radar watches the pairs quoted in the dollar or in a dollar stablecoin, such as USDT and USDC. Pairs quoted in EUR, BTC or other coins are not in it.
In one pair Radar shows at most 20 walls, the 15 largest and 5 more nearest to the price.
Radar notices an order only once it reaches $50,000 and 3 times the usual level of the book.