Stop-loss and take-profit in percent or ticks with every entry. Lines on the chart
How to set SL and TP in percent or ticks in Tradepit so they go out with every entry, place an order right on the chart and drag the SL and TP lines.
Updated
SL and TP with every entry
SL and TP are set in percent or in ticks; they can go out automatically with every new entry or be placed on an open position.
On the chart of a trading window, a limit is placed with Alt and a click or from the right-click menu. The lines of orders, SL and TP are dragged to a new price, and a position is closed right from the chart.
Tradepit works with the exchange directly, through your API key. An order from Tradepit goes straight to the exchange.
Supported exchanges are Binance, Bybit, OKX, Bitget, and KuCoin.
How to start, step by step
- Create an account and add your exchange API key, as in the “Getting started” guide. Give a key for Tradepit only the rights to read and to trade, with withdrawals and transfers turned off.
- Open “Trading” → “Futures” or “Spot” and pick a pair.
- Choose the size in the “Trading” tab under the chart. An order size is set in money, for example 1,000 USDT, not in coins.
- In the “SL / TP” card press ⚙, set the distance for “Stop-loss” and “Take-profit” and leave “place with entry” on.
- Hold Alt over the chart, check the order plan by the cursor and click the price without moving the mouse. The limit goes to the exchange at once and carries the SL and TP of the card.
In the “Spot” and “Futures” windows trading from the chart is on from the start. In the “Terminal” section it is off by default. To trade from a book's chart, show the chart with the ▲ “Chart on top” or ▼ “Chart below” button in the book's header and tick “Terminal” in “Account” → “Trading”, block “Allow trading from the chart”.
SL and TP on entry
In the “Spot” and “Futures” windows SL and TP are set in the “SL / TP” card of the “Trading” tab under the chart. Behind its ⚙, “Stop-loss” and “Take-profit” each have a distance and a “place with entry” box of their own.
A distance is written in one of three units. “tick” is one unit of the pair's price, so 50 ticks on a pair priced at 60,000 is 50 in price. “%” is a share of the price and works the same on any pair. “price” is the level itself, not a distance. Switching the unit keeps the level, only how it is written changes.
In ticks and percent the terminal picks the side of the level itself. For a LONG the stop goes below the entry price and the take above it, for a SHORT the other way round.
Before the entry a level is measured from the last price or from the limit price, and with a position open from the position's entry price. The caption under the field tells which price it is measured from, “from last”, “from limit”, “from entry” or “price by hand”. Beside it you see the result if the level triggers, in the quote currency without fees, and the distance in percent.
With “place with entry” on, the level goes to the exchange together with every new entry from the market and limit cards and from the chart. With the box off, the entry goes out without this level, and the distance stays just a plan. For a new entry a distance of 0 means no level.
With a position open, the SL and TP buttons of the card place or move the level for the whole position size at once, without confirmation, and the other level does not change. A distance of 0 here puts the level at the entry price. Without an open position the SL and TP buttons are inactive.
In the “Terminal” section SL and TP are set in the book's ⚙, fields “Stop loss on entry, %” and “Take profit on entry, %”. Every entry from this book, a click, a key or the chart, carries an SL and a TP this far from its entry price. Only percent here, from 0 to 50, and 0 means no level.
An order from the chart
Hold Alt over the chart and the order plan appears by the cursor. It shows the side, quantity, price, margin and the monetary amounts for SL and TP. Below the market it is a LONG, above it a SHORT.
A click without moving the mouse sends a limit at that price at once. If the mouse moved between press and release, nothing is sent. The size comes from the “size” field of this window's order form, and the SL and TP from its levels with “place with entry” on.
A right click opens the menu of the price under the cursor. “Limit …” places a limit, like Alt and a click. “Buy at market” and “Sell at market” send a market order for the order form's size at once. A limit and a market order from the menu carry the same SL and TP.
“Set stop-loss here” and “Set take-profit here” give the open position a new level when it has none yet. “Stop-loss here” and “Take-profit here” move the level that already stands.
“Buy stop here” and “Sell stop here” place a conditional entry that fires when the price reaches the level. Such an entry goes out without SL and TP of its own.
When an order cannot be placed, a yellow or red label by the cursor or a grey menu item tells why. For example, there is no key, the size does not fit this level, or SL or TP is on the wrong side.
The trading keys over the chart place orders with the same SL and TP. The list and rebinding are in “Account” → “Hotkeys”.
By default orders from the chart go to the exchange at once, without confirmation. In the “Confirm” mode, block “Orders” in “Account” → “Hotkeys”, the “Spot” and “Futures” windows ask you to confirm an order from the chart before sending it.
Lines on the chart
The chart shows lines for your account's position, liquidation price, limit orders, conditional entries, stop-loss and take-profit.
The position line stands at the entry price, and its label shows side, quantity, result in money and the percent of margin. × on the label closes the whole position at market. “Liquidation” shows the liquidation price as the exchange reports it and its distance from entry, and this line cannot be moved.
“LONG LIMIT” and “SHORT LIMIT” are your limits. “STOP LONG” and “STOP SHORT” are conditional entries, not a stop-loss. Drag the label to move them to a new price, and × cancels the order at once. A limit is not moved past the market.
On the SL and TP lines the percent is the distance from the entry price. While you drag a line, its label shows the new price and the percent from entry. Where the level would fire at once, the label reads “A stop there fires at once” or “A take there fires at once”. The level's price snaps to the exchange's price step.
A released SL or TP line goes to the exchange at once. Esc while dragging cancels the move. If the exchange rejected the level, the line goes back to where the level stands on the exchange.
× on an SL or TP line always asks for confirmation, “Remove the stop-loss? The position stays unprotected” or “Remove the take-profit?”. In the “Spot” and “Futures” windows in the “Confirm” mode, moving a limit and closing the position from the chart ask too.
“sent…” means the action is on its way and the terminal waits for the exchange. Dim lines without × can only be watched, the chart has no key or its account is a different one.
What goes to the exchange
SL and TP stand on the exchange as orders. In the “Open orders” tab each order shows its type, “limit”, “stop loss”, “take profit” or “conditional”. “Cancel” takes an order off the exchange, “Close” closes a position at market.
A position has one SL and one TP. If the open position already has such a level on the exchange, a second one is not placed. Move it with the SL or TP button or with its line on the chart.
On spot the exchange holds no position, and Tradepit builds it from the coins on the account and your trades. A stop and a take there are separate orders that sell those coins. Spot has no short, a sale only closes the coins you hold.
Tradepit does not touch an SL or TP placed outside this terminal, and places no new one beside it.
If the exchange took the entry but not the stop, the line under the buttons reads “Position open, no stop.”, and for a limit entry “Limit resting, no stop.”. The same goes for the take, with the words “no take”.
Limits
The boxes of “Allow trading from the chart” are saved at once. With a box off, orders and the position are shown on the chart, but nothing is placed, moved or closed from it. The charts of the “Charts” section never trade.
On some exchanges the SL and TP orders for a limit entry remain in this browser and are sent to the exchange when the entry order first fills. Keys stay only in your browser, so while Tradepit is closed in this browser, these SL and TP orders are not sent to the exchange.
A limit from the chart is not placed inside the spread. If the price has already moved past the level, the order is not sent.
If a window has several charts, entries go only from the active one, while moving, cancelling and closing work from any.
Size and leverage are changed in the order form, not on the chart.
This is not trading advice.